Are you not happy with the older home audio systems and older model entertainment devices? Then the Bluetooth transmitters and receivers are the perfect solutions for you. The Bluetooth devices transform the old systems into smart devices. Permitting them for music to be transmitted through a wireless connection.
In other words, the modern Bluetooth devices help entertainment devices such as television and record players to transmit the music directly into the stereo amplifier and speaker devices. But the problem to buy this kind of Bluetooth transmitter devices is they will cost a lot in the retailer shops.
But there is another way to use this Bluetooth transmitter. Anyone can quickly design this device in less time with low cost. Many people tend to create their own Bluetooth devices.
Are you interested in developing your Bluetooth transmitter device? Here are some instructions to create DIY Bluetooth transmitter and receiver devices.
Parts required for making a Bluetooth Transmitter:
If we need to make a Bluetooth transmitter, we need some stuff which are very essential. Tools such as a wire stripper to transfer the power, as we all knew a crucial thing is soldering iron, hot glue lead.
And some other parts are 3.5 mm of audio jack or 6 mm of guitar amp jack of a Bluetooth model. It can be from the headset or a dongle and wire or any other thing, but it should be a 28 AWG wire. Then the Bluetooth can be made very quickly by following the below steps,
Steps to create a Bluetooth Transmitter:
- Know about connection
- Removing components
- Steps of soldering
- Solder the wire with the terminals correctly
- Putting the things back in their places
Bluetooth dongle with Bluetooth mono headset is best to prepare a homemade receiver. Now let us see how to make a Bluetooth transmitter.
To know the connection:
We should analyse and understand the connection of the wire so then only we can be able to reconnect all those things. After opening the Bluetooth, we should see three wires where they have placed. Further check the battery condition, the charger condition, and primary audio connection. It may confuse you where the positive and negative connector is. Next, we do need to cut it.
After identifying the positive wire, we should cut it .then only it will allow the internal speaker to be removed. It is the procedure of removing the components.
Steps of soldering:
We should solder the + and the – of exterior side of the receiver and then seal it by using a hot glue gun.
Solder the wire to the terminals correctly:
It involves a ground wire into the audio cable to the audio terminal so that audio terminal entirely replaced the former speaker connection.
Putting things back to their places:
After finishing all those above activities, we can put all the items back to their places.
Today nearly all the smart gadget is coming with the Bluetooth and it makes it easy for them to connect with each other!